Micro Annular Gear Pumps-Hermetic Inert Pump Series mzr-6355
The hermetic and chemically inert series is almost universally suitable for aggressive liquids and therefore innovation in pumping technology. Rotors and functional elements made from nickel-based tungsten carbide or ceramics like zirconia and alumina lend the pumps high chemical resistance and outstanding wear-resistance. With shaft and bearing material of hot isostatic pressed silicon carbide (SSiC) and the housing components of alloy C22 (2.4602), the pumps can be used with demanding oxidizing and reducing liquids, acids, bases, and solvents. The pumps are designed hermetically and driven by a torsion-proof NdFeB magnetic coupling.
For mini plant and micro reaction technology
The mzr-6355 micro annular gear pump of the hermetic and chemically inert series is, considering its almost universal suitability for aggressive and corrosive liquids, a revolution in the pump technology. Its rotors and functional elements being made of ceramics, the pump shows the highest chemical resistance and outstanding resistance to wear. Thanks to the use of SSiC (pressureless sintered silicon carbide) as bearing and shaft material, a magnetic coupling, and case components made out of alloy C22 (DIN 2.4602), this pump will take up any challenge in the chemical industry applications.
Advantages of Hermetic inert pump series mzr-6355
High resistance to corrosion: oxidizing and reducing liquids, acids, and bases
Long service life: wear-resistant ceramic components
Hermetically sealed: magnetic coupling (NdFeB)
Compact, chemically inert pump head:1 46 mm long, alloy C22, SSiC, Al2O3 and ZrO2-ceramics
Precision motor and user-friendly control: dynamic DC-servomotor with encoder and microcontroller,
RS-232 or CAN-Bus, analog, I/O
Precise dosage, low pulsation: rotary micro annular gear technology, no valves
Applications of Hermetic inert pump series mzr-6355
Mini plant technology
Micro reaction technology
Technical data of Hermetic inert pump series mzr-6355
Flow rate: 0.024 – 144 ml/min
Smallest dosage volume: 15 µl
Displacement volume: 24 µl
Maximum system pressure: 80 bar (1160 psi) (inlet pressure + differential pressure)
Differential pressure range: 0 – 40 bar
Liquid temperature range:-5 … +60 °C (-20 … +200 °C *)
Viscosity range: 0.3 – 1000 mPas
Precision CV:< 1% (Coefficient of variation CV)
Velocity range: 1 – 6000 rpm
Fluid connection: 1/8″ NPT internal thread, lateral optional: 1/8″ NPT internal thread, frontal
Wetted parts:
- Pump case alloy C22 (2.4602), optional: stainless steel 316L;
- seals FFKM (Kalrez® Spectrum™ 6375), optional: FPM, EPDM;
- shaft/bearing sintered silicon carbide (SSiC);
- bearing and wetted functional parts Al2O3 ceramics;
- rotors TAZ composite ceramics, optional: tungsten carbide Ni-based
Coupling: 8-pole connector NdFeB magnetic coupling
Motor: DC-servomotor, 24 V DC, 44 W, with microcontroller
Interface: 0–10 V, 0 (4) –20 mA, RS-232, 1 digital input/output, optional: CAN-Bus
Dimensions (L x W x H): 146 x 70 x 72 mm
Weight: approx. 1650 g
Remarks
* with optional heat insulation module, Customized solutions on request.
Notice
Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme. Actual performance may vary. Specifications are subject to change without notice.
